Bushfire Risk in Mount Mcintyre, SA: BAL Ratings & Property Safety
Bushfire Risk Score
3.2/10Moderate bushfire risk — Adelaide Hills and vegetated areas at elevated risk
Key Facts
- Bushfire Risk
- Moderate bushfire risk — Adelaide Hills and vegetated areas at elevated risk
- Trend
- increasing
- Suburb
- Mount Mcintyre, SA
- Assessment
- BAL assessment recommended
- Postcode
- 5279
- Highest high-risk exposure
- 8.5% of land (surface flood)
Bushfire Risk Analysis
Mount Mcintyre in South Australia is located within a region where bushfire risk is determined by proximity to bushland, vegetation type, slope, and prevailing weather conditions. The SA Country Fire Service (CFS) maps bushfire-prone areas and issues BAL (Bushfire Attack Level) ratings for individual properties.
Bushfire Attack Level (BAL) ratings range from BAL-LOW to BAL-FZ (Flame Zone) and determine construction requirements under Australian Standard AS 3959. Properties in Mount Mcintyre that are within 100 metres of classified bushland are likely to require a BAL assessment before building or renovating.
BAL construction cost estimates for properties in Mount Mcintyre vary significantly by rating: BAL-LOW requires minimal additional spend ($0–$5,000), BAL-12.5 adds approximately $5,000–$15,000 in construction costs for ember-proofing and material upgrades, BAL-19 costs range from $20,000–$40,000, BAL-29 from $40,000–$75,000, BAL-40 from $75,000–$150,000, and BAL-FZ (Flame Zone) can add $150,000–$200,000 or more due to the stringent construction standards required for direct flame contact protection under AS 3959.
CSIRO research indicates that climate change is extending fire seasons and increasing the number of severe fire weather days across southern and eastern Australia. This trend may increase bushfire risk exposure for suburbs like Mount Mcintyre over the coming decades, making property-level risk assessment increasingly important.
SA Country Fire Service publishes bushfire-prone land maps, fire history data, and property preparation guides for Mount Mcintyre and surrounding areas. These resources, combined with a site-specific BAL assessment, provide the most complete picture of bushfire risk for any property.
For a property-specific bushfire risk report for any address in Mount Mcintyre — including BAL zone assessment, evacuation route mapping, and risk mitigation recommendations — use the ClimateNest full analysis tool.
Mount Mcintyre sits within ClimateNest's suburb-level hazard model for bushfire risk. 6.7% of the suburb's land area is mapped in high-risk bushfire zones and 69.9% in moderate-risk zones, based on the national hazard overlay. Exposure at this scale varies street by street, which is why an address-level check matters before you buy or insure a specific property in Mount Mcintyre.
Mount Mcintyre (postcode 5279) is tracked in ClimateNest's suburb hazard model, which maps the share of the suburb's land exposed to each hazard at high and moderate levels. The suburb's highest high-risk exposures are surface flood (8.5% of land in high-risk zones), bushfire (6.7% of land in high-risk zones), extreme wind (4.5% of land in high-risk zones). Exposure is not uniform across Mount Mcintyre — individual properties can sit well above or below these averages, so an address-level check is recommended before buying, selling or insuring.
Explore Mount Mcintyre Risk Reports
View other climate risk assessments for Mount Mcintyre:
Frequently Asked Questions
Is Mount Mcintyre in a bushfire prone area?
Parts of Mount Mcintyre may be designated as bushfire prone land, particularly areas near bushland reserves, national parks, or vegetated corridors. Check your specific property's BAL rating through ClimateNest or your local council, as bushfire exposure varies significantly by location within the suburb.
What does the bushfire risk score mean for Mount Mcintyre?
The bushfire risk score for Mount Mcintyre reflects the suburb's overall exposure to bushfire hazards based on vegetation proximity, fire history, slope, and climate projections. A higher score indicates greater potential bushfire impact, but property-level risk depends on your specific address — two neighbouring properties can have different BAL ratings.
What BAL rating applies to properties in Mount Mcintyre?
BAL ratings in Mount Mcintyre depend on the property's distance from classified vegetation, vegetation type, and slope. Ratings range from BAL-LOW (lowest risk) to BAL-FZ (Flame Zone). A site-specific assessment under AS 3959 is required to determine the exact BAL rating for any property.
How much does BAL compliance cost for new builds in Mount Mcintyre?
BAL compliance costs in Mount Mcintyre scale with the rating: BAL-12.5 ($5,000–$15,000), BAL-19 ($20,000–$40,000), BAL-29 ($40,000–$75,000), BAL-40 ($75,000–$150,000), and BAL-FZ ($150,000–$200,000+). These estimates cover upgraded materials, ember-proofing, and construction requirements under AS 3959.
Does bushfire risk affect insurance in Mount Mcintyre?
Yes, properties in bushfire-prone parts of Mount Mcintyre may face higher building insurance premiums. Insurers assess bushfire risk based on the property's BAL rating, fire history of the area, and proximity to bushland. Some insurers may restrict cover in very high-risk locations.
Can I reduce my bushfire risk in Mount Mcintyre?
Yes, you can reduce bushfire risk through measures such as maintaining cleared asset protection zones, using ember-proof mesh on vents, installing metal gutter guards, using non-combustible building materials, and maintaining defendable space around the property. The CFS provides detailed property preparation guides.
How does bushfire risk affect property value in Mount Mcintyre?
Properties in designated bushfire-prone areas of Mount Mcintyre may experience reduced buyer demand, higher insurance costs, and additional construction requirements under the National Construction Code. These factors can influence long-term property values.
Where can I find official bushfire maps for Mount Mcintyre?
Official bushfire-prone land maps for Mount Mcintyre are published by SA Country Fire Service and your local council. These maps identify areas where BAL assessments are required for new construction. For emergency warnings and current fire incidents in Mount Mcintyre, visit https://www.cfs.sa.gov.au.
What share of Mount Mcintyre is exposed to high surface flood risk?
ClimateNest's hazard overlay maps 8.5% of Mount Mcintyre in high-risk zones for surface flood, with a further 76.6% in moderate-risk zones. Suburb-level exposure is not uniform — individual properties can differ from these averages, so an address-level check is recommended.
Is Mount Mcintyre Safe from Climate Risk?
Enter your address below for an instant climate risk assessment for Mount Mcintyre, South Australia, covering flood, bushfire, sea level rise and more.
What A$69 could save you from
*Industry sources: ICA, APRA, RBA
Full report from A$69 · Australian addresses only · 8 hazard scores · Insurance trajectory · 2030 & 2050 projections